Stoke-on-Trent & Staffordshire
Looking for a structural engineer Stoke-on-Trent homeowners and builders trust? We provide fixed-fee structural calculations from £245 for wall removals, loft conversions, extensions and structural alterations across all six towns and the wider Staffordshire area. Building Control-ready within 24 to 72 hours.
Stoke-on-Trent's Victorian terraces in Longton and Fenton, 1930s semis in Trentham and Penkhull, and newer estates in Meir Park and Trentham all have different structural characteristics. We check the construction type before specifying any beam, not after.
We respond to Stoke-on-Trent enquiries within 24 hours.
Most structural engineering jobs in Stoke-on-Trent cost between £245 and £1,500. All fees are fixed and confirmed before we start.
| Service | Typical Fee (Stoke-on-Trent, 2026) | What Is Included |
|---|---|---|
| Single RSJ beam calculation | £245 to £450 | Beam sizing, padstone design, masonry checks |
| Load bearing wall removal | £300 to £600 | Full Building Control calculation pack |
| Loft conversion structural design | £395 to £1,200 | Floor joists, ridge beam, dormer supports |
| Home extension structural calculations | £600 to £1,500 | Beams, foundations, roof structure |
| Structural inspection and report | £400 to £900 | Cracks, movement, subsidence, pre-purchase |
We cover all common residential structural engineering across Stoke-on-Trent and the surrounding area.
Steel beam calculations for kitchen knock-throughs and open-plan layouts across all six towns from £245. Victorian terraces in Longton and Fenton and 1930s semis in Penkhull are our most frequent Stoke-on-Trent jobs.
Ridge beams, floor joists and dormer framing for loft conversions across Stoke-on-Trent from £395. We design the structural upgrade for roof spaces across all property types in the six towns.
Structural packs for rear and side extensions from £600. All packs are Building Control-ready for Stoke-on-Trent City Council and private approved inspectors.
All structural alterations Stoke-on-Trent homeowners need: wall removals, chimney breast removals and new openings. Complete calculation packs from £300.
Structural checks and reports for cracking or movement in Stoke-on-Trent properties from £400. Pre-purchase structural assessments also available.
All structural calculations produced to Eurocodes and British Standards. Packs formatted for Stoke-on-Trent City Council Building Control and private approved inspectors. Inspector queries answered at no extra charge.
Structural alterations is any work that changes how your property carries load. Here is what that means for Stoke-on-Trent properties.
Structural alterations Stoke-on-Trent projects include wall removals, chimney breast removals, new openings in load-bearing walls, floor alterations and any work that changes the load path through the building. Stoke-on-Trent City Council Building Control requires a structural engineer's calculation pack before approving any of these works. Structural alterations calculations start from £300 and are delivered in 24 to 72 hours for most standard residential jobs.
Victorian terraces in Fenton and Longton have solid brick walls with shallow foundations that affect padstone design. 1930s semis in Trentham and Bucknall have cavity brick construction with different beam-bearing requirements. New-build estates in Meir Park use timber frame construction where structural alterations need a different approach entirely. Bungalows across Meir Heath and Trentham are popular for dormer additions, and we check existing roof loads before designing any new structure.
Local factors that influence structural design in Stoke-on-Trent.
Fenton and Longton terraces have solid brick walls with shallow footings. We check age and stiffness before designing any beam or padstone.
Trentham, Bucknall and Penkhull semis are ideal for open-plan conversions. Cavity walls require specific padstone sizing.
Meir Park and Trentham newer homes use wider spans and modern trussed roofs. Connections need careful detailing.
Meir Heath and Trentham bungalows are popular for dormer additions. We check existing roof loads before specifying new structure.
We cover all of Stoke, Hanley, Longton, Fenton, Burslem and Tunstall at the same fixed fee and turnaround.
A straightforward five-step process from enquiry to Building Control submission.
A sketch, photos or architect plans. Anything helps us start.
We confirm a clear fixed fee in writing before any work begins.
We design the beams, joists, padstones and connections required.
A clean Building Control-ready PDF for your builder and inspector.
We answer Building Control queries included in the fixed fee.
Recent feedback from homeowners and builders across Stoke-on-Trent.
"Needed a knock-through in our 1930s semi in Bucknall. SECalcs explained everything and had calculations ready in two days. Building Control passed it straight away."
Mark R, Bucknall, Stoke-on-Trent
"Loft conversion calculations for our Trentham property delivered quickly. The engineer talked us through the options and the builder could follow the drawings easily."
Sarah L, Trentham, Stoke-on-Trent
"Rear extension in Fenton handled professionally. Fast price, clear drawings and no issues with Building Control."
Adam and Claire, Fenton, Stoke-on-Trent
We handle structural engineering across Stoke-on-Trent and the surrounding area. Most work is handled remotely.
Most residential structural engineering jobs in Stoke-on-Trent cost between £245 and £1,500. A single RSJ beam calculation starts from £245. A load bearing wall removal is £300 to £600. A loft conversion structural package is £395 to £1,200. A home extension is £600 to £1,500. All fees are fixed and confirmed before we start.
Yes. Building Control requires structural calculations before approving any load bearing wall removal. A builder cannot provide these. You need a qualified structural engineer Stoke-on-Trent Building Control will accept to design the beam, check the padstones and produce the full calculation pack.
Most Stoke-on-Trent jobs are ready within 24 to 72 hours. A single RSJ calculation is typically done the next working day. Loft conversions and extensions take 5 to 7 working days.
Yes. We regularly design RSJ beams for Victorian and Edwardian terraces across Longton, Fenton and Hanley, including chimney breast removals and narrow room layouts where standard beam tables do not apply.
Yes. Our calculations are produced to British Standards and Eurocodes and are formatted for Stoke-on-Trent City Council Building Control. If the inspector asks for clarification we provide answers as part of the service at no extra charge.
Most jobs do not require a site visit. We work remotely from your drawings and photographs. If a visit is needed for complex structural issues we tell you upfront. Site visits are £250 to £400.
Fixed-fee structural calculations from £245. Building Control-ready in 24 to 72 hours.
Fixed fees, fast turnaround and Building Control-ready calculations every time. Call us on 07359 267907 or fill in the quote form above and we will come back to you the same working day.
SECalcs Structural Engineers — serving Stoke-on-Trent, all six towns and the wider Staffordshire area.
