Structural Engineer Didsbury

What we do in Didsbury

We cover all residential structural engineering work across local house types, from Victorian terraces near Burton Road to 1930s semis around Parrs Wood and Fog Lane.

Residential structural engineering

Most of our work involves extensions, wall removals, lofts and roof strengthening.

We prepare the structural calculations Didsbury projects need for Building Control approval.

If your designer has given you drawings, we turn them into a full set of building control calculations Didsbury officers expect to see.

Beam and wall removal design

Kitchen knock-throughs are very common in West Didsbury terraces and in the 1930s semis across East Didsbury.

We check the loads above, prepare the RSJ design Didsbury jobs rely on and produce beam calculations Didsbury builders can follow.

We set out the beam sizes, bearings and padstones in a way your builder can follow without confusion, even on tight sites.

Loft conversion and roof support

Loft work in Didsbury often involves hip-to-gable changes or a rear dormer.

As a loft conversion structural engineer Didsbury clients use, we design ridge beams, floor steels and rafter supports.

We make sure the layout works with head height and avoids unnecessary steel if the timber scheme can handle the loads.

You can also see our Manchester loft conversion page if you’re planning a dormer or hip-to-gable.

Structural inspections and reports

If you have cracks, sagging floors or signs of movement, we can carry out a structural inspection Didsbury homeowners trust.

When buying a property, a structural report Didsbury surveyors request can help you understand risks before committing.

We explain what the problem is, what caused it and what repairs would work.

Prices for structural engineering in Didsbury

Small jobs such as single wall removals or simple beams tend to fall between £250 and £450 for full calculations and drawings.

Loft conversions, bigger extensions or more complex roof alterations usually range from £600 to £900 depending on layout and steelwork.

Turnaround times

Most simple beams are delivered within 24 to 48 hours once we have the full details.

More involved layouts such as lofts or larger extensions may take a few working days.

Delays usually come from missing information or last-minute changes to drawings.

We guide you through what we need and help you get everything in place so the pack reaches Building Control without delays.

If you need calculations, see our Manchester steel beam service for fast turnaround.

Local knowledge: Didsbury housing and Building Control

Didsbury's housing stock ranges from Victorian and Edwardian terraces to post-war semis and flats near Didsbury Village, Withington and Burnage.

Each style has its own structural habits. Terraces may have shared chimney stacks, while 1930s semis often need stronger floor zones for lofts.

We submit building control calculations Didsbury clients need to Manchester City Council Building Control or approved inspectors.

For general planning guidance, you can also check the Planning Portal.

Recent Didsbury projects

Kitchen knock-through in West Didsbury

A homeowner on Burton Road wanted an open-plan kitchen and dining space.

We checked the load path in the Victorian terrace, designed the steel beam and delivered the pack within two days so their builder could start.

Loft conversion in East Didsbury

A 1930s semi near Parrs Wood needed hip-to-gable reinforcement and a rear dormer.

We designed the ridge beam, floor steels and timber strengthening and supplied a clear set of drawings for the loft contractor.

Rear extension linking to garden in Withington

A family wanted a brighter ground floor with a wide rear opening.

We produced calculations for the steel frame, lintels and roof support, plus drainage notes for their designer.

The full pack went to Building Control the same week.

Chimney removal in Burnage

A landlord needed safe removal of a redundant chimney breast in a mid-terrace.

We assessed the load above, designed steel supports and prepared a short structural note for the building inspector.

Work started soon after.

Case Study in Didsbury

We recently handled a kitchen wall removal in a 1930s semi on the border of West Didsbury. You can see the full breakdown here:

Kitchen wall removal case study

What clients say

• “Clear drawings and fast reply. Made the wall removal simple.” West Didsbury
• “Great service for our loft. Builder said the plans were spot on.” Didsbury Village
• “Quick turnaround and easy to deal with.” Withington
• “Explained everything in plain English and kept costs fair.” Burnage
• “Sorted our beam design same day.” Fallowfield

About your structural engineer

We specialise in residential structural design for South Manchester homes.

Most jobs are everyday domestic work where clear thinking matters more than jargon. You get practical advice based on years of design experience across local house types.

Drawings and calculations are set out so you and your builder know exactly what to do.

If the contractor has questions on site, we explain the details in simple language.

How the process works

Our process is straightforward. You send the basics, we sort the technical work and your project moves forward.

FAQs – structural engineer Didsbury

Get a quote for your Didsbury project

If you need a structural engineer Didsbury for a wall removal, loft, extension or inspection, get in touch.

We usually reply the same day. Call, email or request a quote.

We cover all parts of Didsbury, from West and East Didsbury to Withington, Burnage and the surrounding areas.

If you need support anywhere in Greater Manchester, see our main Manchester structural engineer page.